High Efficiency Low Voltage 3A Buck Converter Targets High Power Density Automotive Designs

Diodes Incorporated has introduced the new automotive-compliant DIODESAP61300Qand DIODESAP61302Qsynchronous buck converters that have a wide input voltage range of 2.4V to 5.5V, and address the need for automotive point-of-loads (POLs) that are more streamlined and exhibit increased efficiency levels. These 3A-rated devices are optimized for use in vehicles’ telematics, ADAS, power and infotainment systems, as well as instrumentation clusters. Moreover, each of these buck converters features a 70mΩ high-side power MOSFET and a 50mΩ low-side power MOSFET which together deliver high-efficiency step-down DC-DC conversion.

Depending on the load conditions, the AP61300Q and AP61302Q converters can be configured to pulse frequency modulation (PFM) or pulse width modulation (PWM) operating modes (using the enable pin). Their quiescent current (IQ) of 19μA, when in PFM mode, allows them to maintain elevated efficiencies even in light load situations. Furthermore, their low drop-out (LDO) mode permits output voltage regulation to be maintained when the input voltage comes close to the VOUT voltage.

Features

• AEC-Q100 Qualified for Automotive Applications

• VIN: 2.4V to 5.5V

• Output Voltage (VOUT): 0.6V to VIN

• 3A Continuous Output Current

• 0.6V ± 2% Reference Voltage

• 19μA Low Quiescent Current (Pulse Frequency Modulation)

• 2.2MHz Switching Frequency (VIN = 5V, VOUT = 1.8V)

• Up to 84% Efficiency at 5mA Light Load

• Programmable Operation Mode Through EN

• Low-Dropout (LDO) Mode

• Power-Good Indicator

Applications

• 非盟tomotive power systems

• 非盟tomotive infotainment

• 非盟tomotive instrument clusters

• 非盟tomotive telematics

• Advanced driver assistance systems (ADAS)

Availability and Pricing

Supplied in SOT563 packages, these devices are AEC-Q100 Grade 1 qualified and are now available at $0.19 in 1000-piece quantities.